Follow the instructions on the screen to complete the installation.
4
Unmount the CD drive:
5
umount /mnt
Installing on Solaris
Note:
HRCONF is not supported by systems running Solaris.
To install ARCCONF on Solaris systems:
Insert the Adaptec Storage Manager Installation CD.
1
The CD mounts automatically. (If it doesn't, manually mount the CD using a command
similar to the one shown below. Refer to your operating system documentation for detailed
instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
Install Adaptec Storage Manager:
2
pkgadd -d/<mount point>/solaris/manager/StorMan.ds
Follow the on-screen instructions to complete the installation.
3
Eject or unmount the Adaptec Storage Manager Installation CD. Refer to your operating
system documentation for detailed instructions.
Installing on FreeBSD
To install ARCCONF on FreeBSD systems:
Insert the Adaptec Storage Manager Installation CD.
1
Mount the Adaptec Storage Manager installation CD:
2
mount /cdrom /mnt
Note:
Your CD-ROM drive may have a different device name or path.
Copy the ARCCONF file to the local hard drive:
3
cp -p /cdrom/freebsd(version)/cmdline/arcconf/(root or other directory)
Change to the ARCCONF installation directory, then enter this command:
4
chmod +x arcconf
Unmount the Adaptec Storage Manager Installation CD. Refer to your operating system
5
documentation for detailed instructions.
Installing on VMWare
To install ARCCONF on VMWare systems:
Insert the Adaptec Storage Manager Installation CD.
1
Mount the Adaptec Storage Manager installation CD:
2
mount -r /dev/cdrom /mnt/cdrom
Chapter 1: Getting Started with the Command Line Utility
8
●