How Do I; Add A Remote System - Adaptec Storage Manager User Manual

How do I...?

Set up my storage space?
Follow the five steps in the
Create or add a new logical drive?
In the Enterprise View, right-click the controller you want, then click Create logical device.
Or, click either of the buttons shown at right.
See Building Your Storage Space on page
Open the Configuration wizard?
In the Enterprise View, right-click the controller you want, then click Create logical device.
Or, click either of the buttons shown at right.
See Building Your Storage Space on page
Turn off the alarm?
Click the Silence button, shown at right.
Or, from the menu bar, click Actions, select Agent actions, select Alarm actions,
then click Silence alarm.
See If your enclosure does not have an enclosure management device, the status icons appear but
do not indicate status. on page
Add a new user to Adaptec Storage Manager?
Any user with a valid network user name and password can log into Adaptec Storage Manager.
See Starting and Logging In on the Local System on page 28
on page 28.

Add a remote system?

Click the Add button, shown at right.
See Logging into Remote Systems from the Local System on page
Prevent a user from changing my storage space?
See Understanding Permission Levels on page 28
Check disk drive or logical drive status?
Hold your cursor over the disk drive or logical drive to reveal status information.
See also Revealing More Device Information on page
Access a feature with a padlock icon beside it?
Enhanced features must be unlocked with a special feature key (sold separately).
See Adding Enhanced Features on page
Appendix C: Quick Answers to Common Questions...
Getting Started Checklist on page
26.
26.
106.
for information on restricting access.
50.
126.
14.
and Understanding Permission Levels
33.
163
●
or
or