Opening The Task Manager - Adaptec Storage Manager User Manual

3
Set the date and time for the task.
Note:
Keep geography in mind—If you are scheduling tasks on remote systems located in
other geographical areas, remember that the time you set for a scheduled task is that
system's time, which may be different from local time. You will be prompted to select a new
time if the one you've set occurs in the past on the remote system.
4
Set the recurrence frequency from the drop-down menu, if the option is available for this
task and you want it to occur regularly. You can set a task to recur daily, weekly, or
monthly.
5
Click Apply.
The task is saved in the Task Manager, and the scheduled task is added to the Task List. For
more information about the Task Manager, see the following section.

Opening the Task Manager

You can use the Task Manager to monitor and modify the tasks you have scheduled. (To
schedule a task, see
Tasks are associated with systems. When you open the Task Manager, you see the scheduled
tasks associated with that local or remote system only.
To open the Task Manager, in the tool bar, click Configure, point to the system, then click
Tasks.
The Task Manager opens on the Tasks tab of a new window. The Tasks tab has two main
panels, as shown in this figure. All scheduled tasks for the system appear in the task list; all
events related to scheduled tasks on that system appear in the event log.:
Note:
From the Tasks tab, you can access other utilities in this window, such as the Email
Notification Manager (see
Chapter 7: Scheduling Recurring or Resource-Intensive Jobs
page 82.)
page 112), by clicking their tabs.
Tasks Tab
Task List
Task Event
Log
83
●