Adaptec Storage Manager User Manual page 97

Disabling a System's Alarm
You can disable the alarm for a selected system, if required.
Caution:
When the alarm is disabled, no audible signal sounds when a Warning- or Error-level
!
event occurs on the system.
1
In the Enterprise View, select the system you want.
2
In the menu bar, click Actions, select Agent Actions, select Alarm Actions, then click
Disable.
The alarm is disabled for that system.
To enable an alarm, repeat Steps
Working with Enclosure Alarms
This section describes how to work with the alarms of the enclosures in your storage space.
Testing an Enclosure Alarm
If an enclosure has an alarm, follow these instructions to ensure that the alarm is working:
1
Ensure that the speakers on your local system aren't muted.
2
In the Enterprise View, select the controller that's connected to the enclosure you want.
3
In the Physical Devices View, right-click the enclosure icon (shown at right) of the
enclosure that you want.
4
Select Alarm actions, then click Test alarm.
The alarm sounds.
5
To stop the test, click OK.
Silencing an Enclosure Alarm
You can silence the alarm on an enclosure while you fix the problem.
To silence the alarm, click the Silence button (shown at right) in the main Adaptec
Storage Manager window.
Disabling an Enclosure Alarm
You can disable the alarm for a selected enclosure, if required.
Caution:
If you disable the alarm, no audible signal will sound when an error occurs on the
!
enclosure.
Chapter 8: Maintaining Physical Devices
1 and 2, selecting the alarm action Enable.
97
●