Adaptec Storage Manager User Manual page 115

4
On the menu bar, select Actions, then click Send test message.
The test message is sent.
If the test is successful, the email recipient receives the test message. If the test fails:
a
Ensure that the recipient's email address is correct. (See
Information or Removing a Recipient on page 115
b
Ensure that your SMTP server address is correct. (See
115 to modify the address.)
c
Try sending the test message again.
Modifying a Recipient's Information or Removing a Recipient
This section describes how to modify a recipient's email address, change the types of event
notifications the recipient receives, or stop sending email notifications to a recipient from a
selected system.
To modify a recipient's information:
1
In the Enterprise View, select the system you want.
2
In the Adaptec Storage Manager tool bar, click Configure, point to the system, then click
Email Notifications.
The Email Notifications Manager opens.
3
Select the recipient you want, then click Modify email recipient. Change the information
as required, then click OK.
Or,
Select the recipient you want, click Delete email recipient, then click Yes to confirm the
deletion.
Modifications become effective immediately.
Modifying Email Settings
You can modify these email settings as your needs change:
Address of your SMTP server
●
'From' address that will appear in email notifications
●
To modify email settings:
1
In the Enterprise View, select the system you want.
2
In the Adaptec Storage Manager tool bar, click Configure, point to the system, then click
Email Notifications.
Chapter 9: Monitoring Status and Activity
Modifying a Recipient's
to modify the address.)
Modifying Email Settings on page
115
●