Jumper Settings - Zotac A75ITX series User Manual

AMD A75ITX series motherboard

Jumper Settings

This chapter explains how to configure the motherboard's hardware. Before using
your computer, make sure all jumpers and DRAM modules are set correctly. Refer to
this chapter whenever in doubt.
JP1-Clear CMOS
JP1 Selection
1-2* Normal*
1
2-3 Clear CMOS
1
Close Open
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to
clear data.
VGA/DVI Selection Jumper (Optional)-JP2
JP2 Selection
DVI *
*
1
VGA (using VGA-DVI
1
adapter)
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen
even if the frequency multiplier setting in CMOS setup is changed.
20
* = Default setting.