Expansion Slots; Mini Pcie Slot; Pcie X16 Slot; Jumper Settings - Zotac G41-ITX series User Manual

Intel G4X-ITX series Motherboard

Expansion Slots

The motherboard contains two expansion slots, one Mini PCIE slot and one PCIE x16 slot.
1
51
MINI_PCIE1
PCIE1
Mini PCIE Slot-MINI_PCIE1
There is one Mini PCIE slot, reserved for the WiFi Module.
PCIE x16 Slot-PCIE1
There is one PCIE x16 slot reserved for graphics or video card that is fully compliant to PCI
Express 1.0.
Note: The PCIE x16 slot supports PCIE graphics cards, but does not support any PCIE
x1 device.

Jumper Settings

This section explains how to configure the motherboard's hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
JP1
1-2* Normal*
1
2-3 CMOS Clear
1
Close Open
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
18
2
52
Selection
* = Default setting.