Deleting Backup Data - Zoom SIB-01 Installation Manual

Deleting Backup Data

You can delete backup data (directories) from the media used for backup,
if the data are no longer needed.
Once a directory has been deleted, it cannot be restored. Take care not
NOTE
to accidentally delete a directory that you may still need.
1.
Verify that the SCSI device is properly connected to the
MRS-1044.
2.
When using a MO drive, or ZIP drive, make sure that the
correct disc is inserted.
3.
In the main screen, press the [PROJECT/UTILITY] key.
Use the cursor [ E ]/[ R ] keys to make the display indicate
4.
"UTILITY BACKUP", and then press the [ENTER] key.
If the above menu does not appear, the MRS-1044 has not
NOTE properly recognized the SCSI device. Check the power on/off
condition of the device and the SCSI connection.
5. Use the cursor [ E ]/[ R ] keys to make the display indicate
"BACKUP DELETE", and then press the [ENTER] key.
The screen for selecting the project to delete appears.
6.
Turn the dial to select the project to be deleted, and press the
[ENTER] key.
The indication "DELETE SURE?" appears on the display, to verify
the delete process.
7.
To execute the delete process, press the [ENTER] key. If you
wish to cancel the process, press the [EXIT] key instead.
When delete starts, the indication "DELETE wait..." appears on the
32 ZOOM MRS-1044 ver 1.2
display.
When the delete operation is finished, the display indication changes
to "DELETE COMPLETE".
8.
To return to the main screen, press the [EXIT] key several
times.
• When wishing to delete backup data spanning several media
NOTE volumes, repeat the above procedure for each volume.
• Always verify the directory name, to make sure that you do not
accidentally delete another project.
ZOOM MRS-1044 ver 1.2 33