Zoom SIB-01 Installation Manual page 13

The backup operation resumes. The new disc number and the
indication "wait..." appear on the display.
To cancel the operation, press the [EXIT] key to bring up the
indication "CANCEL?" on the screen, and then press the ENTER key.
• When a backup spans several media volumes, be sure to note
the disc number on the case and label of the disc.
NOTE
• During restore, CD-R/CD-RW discs must be inserted in the
same order as during backup. Otherwise correct restore is not
possible.
11.
Repeat the above steps until the entire project is backed up.
When the backup is finished, the display indication changes to "SAVE
COMPLETE".
12.
To return to the main screen, press the [EXIT] key several
times.
I Backing up to ZIP or MO drive
9.
To execute the backup, press the [ENTER] key. If you wish to
cancel the process, press the [EXIT] key instead.
When backup starts, the disc number and the indication "wait..."
appear on the display.
Disc number
When the project size is larger than the capacity of one ZIP media
volume, the disc will be ejected after it has been filled up, and a
24 ZOOM MRS-1044 ver 1.2
message prompting the user to insert the next ZIP disc appears.
10.
When the above message appears, insert a new ZIP disc, and
press the [ENTER] key.
The backup operation resumes. The new disc number and the
indication "wait..." appear on the display.
To cancel the operation, press the [EXIT] key to bring up the
indication "CANCEL?" on the screen, and then press the ENTER key.
• When a backup spans several media volumes, be sure to note
the disc number on the case and label.
NOTE
• During restore, ZIP discs must be inserted in the same order as
during backup. Otherwise correct restore is not possible.
11.
Repeat the above steps until the entire project is backed up.
When the backup is finished, the display indication changes to "SAVE
COMPLETE".
12.
To return to the main screen, press the [EXIT] key several
times.
ZOOM MRS-1044 ver 1.2 25