Table of Contents
Advertisement
Quick Links
Installation Manual
MRS-1044
Supplemental Manual
Thank you for selecting the ZOOM SIB-01 (hereafter
called the "SIB-01"). The SIB-01 is a SCSI interface board
designed for installation in the ZOOM MultiTrak Recording
Studio MRS-1044 (hereafter called "MRS-1044"). To
ensure correct use of this product, please read and follow
all instructions contained in this manual.
Contents
Safety Precautions
Installing the SIB-01
Updating the MRS-1044 to Version 1.2
MRS-1044 Version 1.2 Features
Connection of External SCSI Devices
Compatible drives
Connection of SCSI Devices
Creating an Audio CD
V-takes that can be written on an audio CD
About CD-R/CD-RW discs
Recording a V-take on a CD-R/CD-RW Disc
Playing an Audio CD
Finalizing a CD-R/CD-RW Disc
Erasing a CD-RW Disc
Storing a Project on External Media
(Project Backup)
Reading a Stored Project from External Media
(Project Restore)
Deleting Backup Data
Formatting an External Storage Device
Changing the Length of a V-take (Trimming)
Troubleshooting
© Zoom Corporation
Reproduction of this manual, in whole or in part, by any
means, is prohibited.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
SIB-01
ver 1.2
• • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • •
• • • • • • •
• • • • •
• • • • • • • • • • • • • • • •
• • • • • • • • • • • • •
• • • • • • • •
2
3
5
7
8
8
8
10
10
11
12
14
17
18
20
26
32
34
35
38
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zoom SIB-01
Summary of Contents for Zoom SIB-01
-
Page 1: Installation Manual
1.2 Supplemental Manual Thank you for selecting the ZOOM SIB-01 (hereafter called the "SIB-01"). The SIB-01 is a SCSI interface board designed for installation in the ZOOM MultiTrak Recording Studio MRS-1044 (hereafter called "MRS-1044"). To ensure correct use of this product, please read and follow all instructions contained in this manual. -
Page 2: Safety Precautions
Safety Precautions Installing the SIB-01 In this manual, important information that from shocks. The SIB-01 is designed for installation in the side panel slot of the is intended to prevent the danger of injury MRS-1044. • Only install the SIB-01 according to persons and damage to equipment is to the instructions in this manual. -
Page 3: Updating The Mrs-1044 To Version
Updating the MRS-1044 to Version 1.2 In order to use the SIB-01, the MRS-1044 system must be updated to Version 1.2. Perform this update using the "Version Update" CD-ROM supplied with the SIB-01. Correct • To perform the update, a SCSI compatible CD-R/CD-RW drive or CD- ROM drive is required. -
Page 4: Mrs-1044 Version 1.2 Features
Audio CD creation Using a CD-R/CD-RW drive connected to the SCSI connector of the MRS-1044 (with SIB-01 installed), you can create an audio CD. Audio data for up to 99 songs can be stored on a single CD-R/CD-RW disc, provided there is enough space on the disc. -
Page 5: Compatible Drives
The "SCSI ID" is a number from 0 to 7 that serves to identify a device MO drive in a SCSI chain. Because the SCSI ID of the MRS-1044 (SIB-01) is ZIP drive fixed to "7", the setting range for an external SCSI device connected Hard disk to the MRS-1044 is 0 - 6. -
Page 6: Creating An Audio Cd
Only one project can be written at a time. However, as long as the CD-R/CD-RW disc has not been finalized, it is possible to call up another project and add audio data. ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2... -
Page 7: Recording A V-Take On A Cd-R/Cd-Rw Disc
"wait..." is shown on the display. On the lower part of the display, you can check the progress of the write operation. When the write process is finished, the display indication changes to "COMPLETE". ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2... -
Page 8: Playing An Audio Cd
CD-R/CD-RW drive. Check the power D (Digital playback) on/off condition of the drive and the SCSI connection. The digital audio signal of the CD is read into the MRS-1044 and ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2... -
Page 9: Finalizing A Cd-R/Cd-Rw Disc
Indicates the total number of tracks on the CD-R/CD-RW disc. times. (2)Play time Indicates the total playing time of all tracks on the CD-R/CD-RW disc (including pauses) in hours (H), minutes (M), and seconds (S). ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2... -
Page 10: Erasing A Cd-Rw Disc
If the above menu does not appear, the MRS-1044 has not NOTE properly recognized the CD-R/CD-RW drive. Check the power on/off condition of the drive and the SCSI connection. ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2 ZOOM SIB-01... -
Page 11: Storing A Project On External Media
CD-R/CD-RW drive) or "ExtDRV" (when backing up on another SCSI device). For a list of compatible drive brands and models, please visit the ZOOM Corporation web site (http://www.zoom.co.jp). Turn the dial to select a project, and press the [ENTER] key. - Page 12 The subsequent screens and operation steps are slightly different, depending on which kind of drive is selected as backup target. When the above message appears, insert a new CD-R/CD-RW disc, and press the [ENTER] key. ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2...
- Page 13 Disc number When the project size is larger than the capacity of one ZIP media volume, the disc will be ejected after it has been filled up, and a ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2...
- Page 14 [ENTER] key. display. When the project backup spans several CD-R/CD-RW discs, a The name of the project to be restored and the new project number are ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2...
- Page 15 • To change the restore source disc, press the [EXIT] key and Use the cursor [ E ]/[ R ] keys to make the display indicate repeat the procedure from step 4. ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2...
- Page 16 When the restore operation is finished, the display indication changes to "LOAD COMPLETE". To return to the main screen, press the [EXIT] key several times. To return to the main screen, press the [EXIT] key several ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2...
-
Page 17: Deleting Backup Data
To execute the delete process, press the [ENTER] key. If you wish to cancel the process, press the [EXIT] key instead. When delete starts, the indication "DELETE wait..." appears on the ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2... -
Page 18: Formatting An External Storage Device
"FORMAT COMPLETE". 7/8, 9/10). When dual tracks are selected, the currently selected V-take for each track is automatically selected for trimming. To return to the main screen, press the [EXIT] key several times. ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2... - Page 19 The start point cannot be moved forward from the original position, NOTE and the end point cannot be moved backward from the original position. When the end point has been specified, press the [ENTER] key. ZOOM MRS-1044 ver 1.2 ZOOM MRS-1044 ver 1.2...
-
Page 20: Troubleshooting
MRS-1044 does not recognize SCSI device [MO drive, ZIP drive, or hard disk related] Check whether SIB-01 is correctly installed. EMPTY Directory does not exist. • • • • • • • • •... - Page 21 ZOOM CORPORATION NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan PHONE: +81-42-369-7116 FAX: +81-42-369-7115 Web Site: http://www.zoom.co.jp Printed in Japan SIB-01-5000-1...
Need help?
Do you have a question about the SIB-01 and is the answer not in the manual?
Questions and answers