Zoom SIB-01 Installation Manual page 12

Size of project (required for backup)
When the target device is a hard disk and the capacity of the hard
NOTE
disk is smaller than the project size, backup cannot be carried out.
7.
Press the [ENTER] key.
The name of the directory to be used for backup appears.
Directory name
The "directory" (also called "folder") is a hierarchical unit that will be
created on the backup media when the backup is executed. All data for
the project are stored in that directory.
In the default condition, the directory name is "PROJxxx" (where xxx
is the project number). This can be changed as desired. (The currently
flashing character can be edited.)
If required, use the cursor [ E ]/[ R ] keys and the dial to edit
8.
the directory name, and then press the [ENTER] key.
The display now shows the indication "SAVE SURE?".
For details on the editing procedure and allowable characters,
refer to page 36 of the MRS-1044 operation manual.
The subsequent screens and operation steps are slightly different,
depending on which kind of drive is selected as backup target.
22 ZOOM MRS-1044 ver 1.2
I Backing up to a hard disk
9.
To execute the backup, press the [ENTER] key. If you wish to
cancel the process, press the [EXIT] key instead.
While the backup is in progress, the indication "SAVE wait..." is
shown on the display. When the backup is finished, the display
indication changes to "SAVE COMPLETE".
If the hard disk becomes full before the end of the backup
NOTE
process, the indication "SAVE FULL" appears on the display and
the backup is aborted. Press the EXIT] key to return to the
previous screen.
10.
To return to the main screen, press the [EXIT] key several
times.
I Backing up to CD-R/CD-RW drive
9.
To execute the backup, press the [ENTER] key. If you wish to
cancel the process, press the [EXIT] key instead.
When backup starts, the disc number and the indication "wait..."
appear on the display.
Disc number
When the project size is larger than the capacity of one CD-R/CD-RW
media volume, the disc will be ejected after it has been filled up, and a
message prompting the user to insert the next CD-R/CD-RW disc
appears.
10.
When the above message appears, insert a new CD-R/CD-RW
disc, and press the [ENTER] key.
ZOOM MRS-1044 ver 1.2 23