Table of Contents
Advertisement
Operation Manual
Introduction
Thank you for selecting the ZOOM 607 (hereafter simply
called the "607").
Please take the time to read this manual carefully so as to
get the most out of the unit and to ensure optimum
performance and reliability.
Retain this manual, the warranty card and all other
documentation for future reference.
Contents
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2
3
4
5
• • • • • • • • • • • • • • • • • •
6
• • • • • • • • • • • • • • • • •
8
10
12
14
• • • • • • • • • • • •
16
18
20
22
23
24
25
38
39
39
Advertisement
Table of Contents
Related Manuals for Zoom 607 Bass
Summary of Contents for Zoom 607 Bass
-
Page 1: Table Of Contents
Operation Manual Introduction Thank you for selecting the ZOOM 607 (hereafter simply called the "607"). Please take the time to read this manual carefully so as to get the most out of the unit and to ensure optimum performance and reliability. -
Page 2: Safety Precautions
The intuitive operation of the unit is derived from the highly About power • Excessive dust or sand popular ZOOM 506 II. Dedicated selectors for the most important • Since power consumption of this unit is • Excessive vibration or shock fairly high, we recommend the use of an distortion effects make the 607 a snap to use. -
Page 3: Basic Terms
MOD/PITCH (modulation), or DLY/REV (delay and reverb), you can selected with the PLAY/EDIT selector. In play mode, you can select also use the ZNR (Zoom Noise Reduction) and amp simulator the effects for playing, and in edit mode, you can change the effect simultaneously. -
Page 4: Controls And Functions / Connections
DC 9V (AC adapter) jack The dedicated AC adapter AD-0006 (9 V DC, 300 mA, center minus) can be connected here. Connecting the adapter here turns the unit on. ZOOM 607 ZOOM 607 BASS BASS... -
Page 5: Selecting Patches For Play
To switch patches in play mode, use shown on the display. the [ W ]/[ Q ] foot switches. Bank Patch number ZOOM 607 ZOOM 607 BASS BASS... -
Page 6: Using The Expression Pedal
( → p. 18). becomes OFF again. on/off switching. • In the bypass mode (effects temporarily switched off), the pedal • The pedal sensitivity can be adjusted ( → p. 23). is automatically assigned to VOL. ZOOM 607 ZOOM 607 BASS BASS... -
Page 7: Using The Tuner Function
Tune the other The left side of the display shows strings in the same the note which is closest to the way. Indication turns faster the more the pitch is off. current pitch. ZOOM 607 ZOOM 607 BASS BASS... -
Page 8: Making/Changing Drive Module Settings
When the DRIVE LED is out, the DRIVE module is off. NOTE store the patch, as described on If you switch to a different effect type in this page 18. condition, the module is automatically turned on. ZOOM 607 ZOOM 607 BASS BASS... -
Page 9: Editing A Patch
Set the PLAY/EDIT selector to "PLAY". The settings will revert to the original condition. If you want to keep the change, store the settings before switching the patch (→ p.18 ). unit reverts to the play mode. ZOOM 607 ZOOM 607 BASS BASS... -
Page 10: Storing/Copying Patches
The store process is also it is not possible to use theVALUE NOTE canceled when NOTE [+]/[-] keys to switch only the [PLAY/EDIT] selector is bank number. operated instead of the VALUE [+]/[-] key. ZOOM 607 ZOOM 607 BASS BASS... -
Page 11: Changing The "Patch Call" Method
This will return the patch select method to the default change. setting. ZOOM 607 ZOOM 607 BASS BASS... -
Page 12: Restoring The Factory Defaults
If desired, repeat steps 2 and 3 to restore other patches. To terminate higher position of the pedal. the Factory Recall operation, press the VALUE [-] key. The unit will switch to the play mode at this point. ZOOM 607 ZOOM 607 BASS BASS... -
Page 13: Effect Sequence
For every effect module, one of the the expression pedal has been assigned settings is " ". When this is to the module with the PEDAL selected, the respective module is ASSIGN key is explained here. turned off. ZOOM 607 ZOOM 607 BASS BASS... - Page 14 This effect type attenuates peak levels and prevents overload of the next module. Higher setting values result in stronger limiter action. LEVEL LEVEL Original sound Limiter TIME TIME OFF (Off) Turns the COMP/LIMIT module off. ZOOM 607 ZOOM 607 BASS BASS...
-
Page 15: Drive Module
RICH (clean type effect) Turns the EQ module off. Rich clean sound with emphasized bass range. SLAP (clean type effect) Clean sound suitable for the slap playing style. EDGE (distortion effect) Treble-rich overdrive sound. ZOOM 607 ZOOM 607 BASS BASS... - Page 16 This effect mixes a variable pitch-shifted component with the original signal, resulting in full-bodied and expansive sound. Higher setting values ZNR (ZOOM Noise Reduction) serves for reducing noise during play result in a more pronounced chorus effect. pauses or silent passages. Higher setting values result in more efficient...
- Page 17 This effect downshifts the sound by one octave and mixes it to the original sound. Higher setting values result in a higher effect sound ratio. Adjusts the mixing ratio of effect sound and original sound. ZOOM 607 ZOOM 607 BASS...
- Page 18 +1 octave + original sound Original sound P3/P4: OFF (Off) Turns the MOD/PITCH module off. Effect sound Effect sound P5/P6: Original sound Effect sound P7/P8: Original sound Adjusts the mixing ratio between input signal and effect sound. ZOOM 607 ZOOM 607 BASS BASS...
- Page 19 Higher right-digit setting values result in stronger reverb. ROOM (Room) This is a reverb effect that simulates the reverberation in a room. Higher right-digit setting values result in stronger reverb. OFF (Off) Turns the DLY/REV module off. ZOOM 607 ZOOM 607 BASS BASS...
-
Page 20: Specifications
High level of noise Dimensions 233 mm (W) x 159 mm (D) x 54 mm (H) Is the expression pedal fully raised? Is ZOOM AC adapter being used? Be Weight 600 g (without batteries) For some patches, the expression pedal... - Page 21 GROOVE SLAP Good for slap style of band music. VOLUME It is recommended to set the ZNR (Zoom Noise Reduction) value for each patch to match the guitar being used. ZOOM CORPORATION NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183-0022, Japan PHONE: +81-42-369-7116 FAX: +81-42-369-7115 Web Site: http://www.zoom.co.jp...