Installing Or Changing The Password - Teledyne 3010TAC Operating Instructions Manual

Trace oxygen analyzer

Hide thumbs

Table of Contents

Oxygen Analyzer

Use the < > arrow keys to scroll the blinking over to

Enter to select the password function. Either the default TBEAI password or

AAAAA place holders for an existing password will appear on screen

depending on whether or not a password has been previously installed.

The screen prompts you to enter the current password. If you are not

using password protection, press Enter to accept TBEAI as the default

password. If a password has been previously installed, enter the password

using the < > arrow keys to scroll back and forth between letters, and the

arrow keys to change the letters to the proper password. Press Enter to enter

the password.

If the password is accepted, the screen will indicate that the password

restrictions have been removed and you have clearance to proceed.

In a few seconds, you will be given the opportunity to change this

password or keep it and go on.

Press Escape to move on, or proceed as in Changing the Password,

below.

If you want to install a password, or change an existing password,

proceed as above in Entering the Password. When you are given the oppor-

tunity to change the password:

Press Enter to change the password (either the default TBEAI or the

previously assigned password), or press Escape to keep the existing pass-

word and move on.

TRAK/HLD Auto—Cal

PSWD Logout More

T ET A I

Enter PWD

A A A A A

Enter PWD

PSWD Restrictions

Removed

Change Password?

<ENT>=Yes

4.3.3.2