Installing Or Changing The Password - Teledyne 3000ZA Operating Instructions Manual

Trace Oxygen Analyzer
The screen prompts you to enter the current password. If you are
not using password protection, press Enter to accept TETAI as the
default password. If a password has been previously installed, enter the
password using the __ arrow keys to scroll back and forth between
letters, and the __ arrow keys to change the letters to the proper
password. Press Enter to enter the password.
If the password is accepted, the screen will indicate that the
password restrictions have been removed and you have clearance to
proceed.
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Press Escape to move on, or proceed as in Changing the
Password, below.
4.3.3.2 I
NSTALLING OR
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the
opportunity to change the password:
Press Enter to change the password (either the default TETAI or
the previously assigned password), or press Escape to keep the existing
password and move on.
If you chose Enter to change the password, the password
assignment screen appears.
—or—
Teledyne Analytical Instruments
PSWD Restrictions
Removed
Change Password?
<ENT>=Yes <ESC>=No
C P
HANGING THE ASSWORD
Change Password?
<ENT>=Yes <ESC>=No
T E T A I
<ENT> To Proceed
A A A A A
<ENT> To Proceed
Operation
35