Installing Or Changing The Password - Teledyne 3000TB Operating Instructions Manual

Operation
The screen prompts you to enter the current
password. If you are not using password protection,
press Enter to accept TETAI as the default password.
If a password has been previously installed, enter the
password using the ◄►arrow keys to scroll back and
forth between letters, and the ▲/▼ arrow keys to
change the letters to the proper password. Press Enter
to enter the password.
If the password is accepted, the screen will
indicate that the password restrictions have been
removed and you have clearance to proceed.
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Press Escape to move on, or proceed as in Changing the
Password, below.
4.3.3.2 I
NSTALLING OR
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the
opportunity to change the password:
Press Enter to change the password (either the default TETAI or
the previously assigned password), or press Escape to keep the existing
password and move on.
Teledyne Analytical Instruments
PSWD Restrictions
Removed
Change Password?
<ENT>=Yes <ESC>=No
C P
HANGING THE ASSWORD
Change Password?
<ENT>=Yes <ESC>=No
3000TB
42