Installing Or Changing The Password - Teledyne 2020 Operating Instructions Manual

4 Operation
Use the UP/DOWN key to scroll the blinking over to
Enter to select the password function. Either the default
place holders for an existing password will appear on screen depending
on whether or not a password has been previously installed.
The screen prompts you to enter the current password. If you are not
using password protection, press Enter to accept TAI as the default pass-
word. If a password has been previously installed, enter the password using
the ENTER key to scroll through the letters, and the UP/DOWN key to
change the letters to the proper password. The last ENTER enters the
password.
In a few seconds, you will be given the opportunity to change this
password or keep it and go on.
Press Escape to move on, or proceed as in Changing the Password,
below.
4.3.3.2
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the oppor-
tunity to change the password:
Enter to change the password (either the default
assigned password), or press Escape to keep the existing password and
move on.
If you chose Enter to change the password, the password assignment
screen appears.
4-8
or

Installing or Changing the Password

or
Teledyne Analytical Instruments
Model 2020
, and press
password or
or the previously