Electrical Connections - Teledyne 3010TAC Operating Instructions Manual

Oxygen Analyzer
is pressed all the way in with a narrow gauge tool (less than 0.18 inch
wide), such as a small hex wrench or screwdriver Allow clearance for the
door to open in a 90-degree arc of radius 7.125 inches. See Figure 3-3.
3.3
Figure 3-4 shows the Control Unit rear panel. Connections for power,
communications, and other system interfaces
Figure 3-4: Rear Panel of the Model 3010TAC Control Unit
For safe connections, no uninsulated wiring should be able to come in
contact with fingers, tools or clothing during normal operation.
Figure 3-3: Required Front Door Clearance

Electrical Connections

Teledyne Analytical Instruments
Part I: Control Unit
Part I: 3-3