Fluke Data Acquisition System/Data Logging System 2680A Getting Started Manual page 74

2680A/2686A
Getting Started Guide
The dialog box entries include:
Data Server IP Address
The IP address of the computer running the Fluke DAQ application.
Fluke DAQ fills in this field with the first IP address found on the computer.
You must change this setting if you want to use a different interface
or if you are using a Dynamic Host Configuration Protocol (DHCP)
on your server. If you are using a DHCP server, use the computer
name instead of an IP address.
Uniform Resource Locator (URL)
The address where Fluke DAQ web files will be stored on the Internet.
SMTP Server IP Address
SMTP name or IP address. SMTP is the Simple Mail Transfer Protocol, a
protocol for sending e-mail messages between servers.
Originator E-Mail Address
Sender e-mail address.
POP 3 Server IP Address
POP 3 name or IP Address. POP is the Post Office Protocol, used to retrieve
e-mail from a mail server.
User Name
User name for authentication.
Subject
Subject shown in the e-mail message.
To
Type the names of the people your want to send the message to.
CC
Type the names of the people your want to send a copy of the message to.
BCC
Types the names of people who should receive the message while their names
are hidden from other recipients of the message.
Send alarms by e-mail
Select the check box to enable the alarm mail settings feature.
Update
Click the Update button after changing any of the alarm mail settings.
64
Note