Starting a Scan Using Spy
Spy triggers and collects its own measurements from up to eight channels from
any combination of devices. The data is not stored and the devices you are
checking do not need to be scanning.
To start a Spy scan
1. Click the
item in the TreeView panel.
2. Click the Spy icon and the Spy window appears. You may select up to 8
channels, including DIO and totalizer.
3. Click
on the Fluke DAQ toolbar. The Spy icon appears in the lowest
to start the scan. Click
Managing Your Network Using Fluke DAQ
to stop the scan.
Getting Started
alg123s.bmp
53