Fluke Data Acquisition System/Data Logging System 2680A Getting Started Manual page 45

The dialog box entries include:
Configuration file
Click the button or the
configuration file.
Network Type
Isolated if the PC is connected directly to the 268XA device or General if the
268XA is part of a network.
Port Number
4369 is the default port number. Fluke recommends that you use the default
port number.
Group is externally wired
All devices may be wired together in a master/slave arrangement.
Advanced Setting autodisable scan – Interval 3 (autoscan rate)
Interval 3 is the rate at which alarm conditions will be monitored. If disabled,
alarm conditions will be monitored only when the associated channel is
scanned during a regular scan interval.
Max 999999 seconds
Min 0.001 seconds
3. To insert a device, select the .cfg file in the TreeView panel and click the
Insert button.
Managing Your Network Using Fluke DAQ
button the to load an existing
Getting Started
alg103s.bmp
35