Fluke Data Acquisition System/Data Logging System 2680A Getting Started Manual page 47

Getting Started
Managing Your Network Using Fluke DAQ
6. Set the IP Address on the Device Settings dialog. Other fields are optional.
You may need to contact your Internet support staff to determine the IP
Address.
alg106s.bmp
The dialog box entries include:
IP Address
Enter the IP Address of the device you are adding.
Verify Button
Click the Verify button to ping the device and verify that the IP Address is
correct. The device and your PC must both be connected to the network for
this to work.
Configuration transfer
You can transfer configuration information from the PC to the device, from
the device to the PC, or from a PC Card to a PC or the device. PC Card
operations are available only for the 2686A.
Description
Enter a meaningful description of the device. 35 characters maximum.
Temperature Units
Specify Celsius or Fahrenheit. This will automatically select temperature units
for all temperature measurements.
37