Fluke Data Acquisition System/Data Logging System 2680A Getting Started Manual page 52

2680A/2686A
Getting Started Guide
If you are configuring a DIO module, the Totalizer Configuration
dialog appears.
The dialog box entries include:
Start Count
Used to specify a start count.
Debounce
Select debounce to ignore signals with a period less than 2 ms (500 Hz);
otherwise, signals up to 5 kHz can be counted.
Direction
If you entered a start count, the start count is reloaded when the totalizer
reaches the terminal count. The totalizer can count up or down to zero.
You can also highlight the IO module and click the
settings including digital IO points and relays.
42
Note
alg111s.bmp
button for more DIO