Inserting And Configuring A Module - Fluke Data Acquisition System/Data Logging System 2680A Getting Started Manual

Inserting and Configuring a Module

To insert and configure a module
1. Highlight a device in the TreeView panel and click the Insert button.
2. Specify the number and type of modules you want to insert in the Module
dialog box.
The dialog box entries include:
Module Number
You can attach up to 6 modules to the device. You can only have a Digital I/O
in Module Slot 6 and can have only one per device.
Module Type
Valid module types are Analog PAI, Analog FAI, or Digital DIO.
Managing Your Network Using Fluke DAQ
Getting Started
alg107s.bmp
alg108s.bmp
39