System Diagram; Transducer - Siemens sitrans LU01 Instruction Manual

System Diagram

SITRANS
LU01
Maximum system capability. Not all components or their maximum quantity
Note:
may be required.

Transducer

1
5 6 7
# 1
to transducer
Page 14
optional
SmartLinx
1
4
point to point communication
fieldbus communication
2
TEMP
SENSOR
1
8 9 10
SITRANS LU01 – INSTRUCTION MANUAL
1
Siemens Milltronics transducer
see Specifications
1
Siemens Milltronics
temperature sensor
mA output
relay output
Notes:
• Transducer cables must be run in a
grounded metal conduit separate from
other wiring (except TS-3 temperature
sensor wiring, if applicable).
• Hazardous voltage present on
transducer terminals during operation.
customer device
customer alarm, pump
or control device
Dolphin Plus, or
customer device
industry control system
such as PLC or DCS,
SCADA, etc.
7ML19985BE02