Optional Smartlinx Module - Siemens sitrans LU01 Instruction Manual

Optional SmartLinx Module

The standard SITRANS LU01 unit may also be enhanced with Siemens Milltronics
SmartLinx communication modules that provide an interface to popular industrial
communication systems.
To change or install SmartLinx module:
With power off and SITRANS LU01 lid opened:
1. Remove the 4 LCD card screws and the card itself.
2. Remove the one dummy card screw and the card itself.
3. Mount the card by mating the connectors and secure the card in place using the two
screws provided.
Refer to the SmartLinx module documentation for any required hardware
Note:
settings prior to replacing the LCD card or closing the SITRANS LU01 lid.
4. Wire in the SmartLinx card according to SmartLinx Manual.
5. Replace the LCD card and secure in place using the screws removed in Step 1.
7ML19985BE02 SITRANS LU01 – INSTRUCTION MANUAL
LCD Card
SmartLinx module
dummy card
board A
Page 13