Siemens sitrans LU01 Instruction Manual page 47

P101 High Alarm
Enter the High Alarm material level for the index displayed. .
Primary Index
Values
P102 Low Alarm
Enter the Low Alarm material level for the index displayed. .
Primary Index
Values
P103 High High Alarm
Enter the High High Alarm material level for the index displayed, (Relay Set Up 2 or 4
only).
Primary Index
Values
P104 Low Low Alarm
Enter the Low Low Alarm material level for the index displayed, (Relay Set Up 3 or 4 only)..
Primary Index
Values
Notes:
• OFF is displayed if the Relay Set Up (P100) selected does not use the Alarm
parameter accessed.
• Ch is displayed if a Custom Relay Parameter was previously operator altered.
7ML19985BE02
Relay
Range: -999 to 9999
Preset 80.00% of Span or equivalent units
Relay
Range: -999 to 9999
Preset 20.00% of Span or equivalent units
Relay
Range: -999 to 9999
Preset 90.00% of Span or equivalent units
Relay
Range: -999 to 9999
Preset 10.00% of Span or equivalent units
SITRANS LU01 – INSTRUCTION MANUAL Page 41