Mitel 3000 Installation And Maintenance Manual page 65

Mitel 3000
Installation & Maintenance Manual
To Set the Display Contrast
You can choose from four levels of display contrast.
1. From your Feature Phone, press the PROGRAM key.
2. Press the Scroll Down key ( ) until "Contrast Options" is displayed.
3. Select "Contrast Options".
4. Select "Level 1", "Level 2", "Level 3" or "Level 4" to set a contrast option. The prompt "Contrast Set"
appears on the display.
System Programming
Extension 20 is the programming extension in default. When the system programming option is selected from
the programming extension you are prompted to enter the system programming password.
If this option is selected from any other extension the display will show "Programming Refused".
From the programming extension, press the PROGRAM key.
1. Press the Scroll Down key ( ) until "System Programming" is displayed.
2. Select "System Programming".
3. Enter the System Programming Password (1111 in default) to access System Programming. For more
information about System Programming, see page 61.
Background Music
This feature allows an extension to have music played over the speaker of a Feature Phone while the extension is
idle. This background music is supplied only if there is an external music source connected to the system. This
background music is disconnected as soon as the user goes off hook or a call is presented to the extension.
1. From your Feature Phone, press the PROGRAM key.
2. Press the Scroll Down key ( ) until "Background Music" is displayed.
3. Select the required option, "Background Music On" or "Background Music Off".
Speakerphone Options
If your telephone is working in a reasonable noisy area and you want to use the speakerphone then you might
need to select the "Noisy Environment" option. This will improve the speakerphone performance when there is
raised background noise.
1. From your Feature Phone, press the PROGRAM key.
2. Press the Scroll Down key ( ) until "Speakerphone Options" is displayed.
3. Select the required option, "Noisy Environment On" or "Noisy Environment Off".
Internal Extension Order
The order in which the extensions are displayed when the Internal Call key is pressed on the idle display can be
changed. In default the extensions are displayed in order of the extension numbers, physical order. This can be
changed so that the extensions are displayed in alphabetical order.
1. From your Feature Phone, press the PROGRAM key.
2. Press the Scroll Down key ( ) until "INT EXT order" is displayed.
3. Select the required option, "Sort physical" or "Sort Alpha".
60