Secure Hot Swap - Mitel 5212 User Manual

Secure Hot Swap

Secure Hot Swap allows you to "swap" your own phone programming when
you are using any other IP phone that is enabled to support the feature.
When you dial your phone's extension number and your assigned Hot Swap
Personal Identification Number, the "swapped" phone immediately assumes
most of your phone settings, including key programming. Any changes you
make to the phone while you are logged in—for example, adding a speed
dial—are saved to your personal profile.
To Hot Swap a phone (the phone must be idle):
1. Dial *68 or the appropriate feature access code.
2. Dial the extension number of the phone you wish to swap.
3. Enter your four-digit Hot Swap Personal Identification Number (PIN).
To verify that the phone has been swapped:
1. Press (SUPERKEY).
2. Press the Prime Line key. If the phone is successfully swapped, the
display shows the extension of the phone whose settings you wished to
swap.
To log out of the Swapped phone (the phone must be idle):
Dial *68 on the phone on which you initiated the Hot Swap.
Note: Your profile can only be active on one phone at a time. You must
"unswap" from the current swapped phone before you can initiate a Hot
Swap of another phone.
-52-