Headset Operation (Headset With Feature Control Switch) - Mitel 5212 User Manual

Headset Operation (Headset with Feature Control Switch)

IMPORTANT NOTE: Headsets with a feature control switch that are
approved for use with the 5224 IP phone must be installed in the dedicated
headset jack on the back of the phone. Installation will disable your handset
microphone. Disconnecting the headset at the jack or at the quick-
disconnect plug restores handset operation. If handset operation is required
for an extended period of time, you should press the Headset feature key to
return the telephone to handset mode.
To answer a call, do one of the following:
Press the flashing Line Appearance key
Quickly press and release the headset's feature control switch.
Lift the handset (see Note 1).
To mute the headset microphone:
Press and hold the headset's feature control switch.
To hang up:
Press CANCEL.
- -
OR
Quickly press and release the headset's feature control switch.
-37-