Auto-Latch Microphone - Mitel 5212 User Manual

Auto-Latch Microphone

To set the handsfree microphone to automatically turn on when
receiving a Direct Page or Intercom call:
1. Press (SUPERKEY).
2. Press # or the No softkey until "Auto Latch Mic?" appears.
NOTE: If your administrator has already enabled Auto-Latch Microphone
on your phone, "Auto Latch Mic?" does not appear in your list of options.
3. Press * or the Yes softkey.
4. Do one of the following:
Press * or the TurnOn softkey.
Press # or the TurnOff softkey.
When Auto-Latch Microphone is enabled and your set is idle, the
(MUTE) key light flashes rapidly to notify you when an incoming
page/intercom call has been established.
When Auto-Latch Microphone is enabled and you are engaged in a
handset conversation, the
you when an incoming page/intercom call is waiting at your phone.
To respond to an Auto-Latch call while your phone is idle:
1. Begin speaking after the paging/intercom party addresses you. Note:
The (MUTE) key light flashes rapidly to indicate that the Handsfree
microphone is on and that the calling party can hear you.
2. Press (MUTE) if you wish to mute your handsfree conversation. The
(MUTE) key light turns on solid.
3. Press (MUTE) again if you wish to turn mute off and return to the
handsfree conversation. The
To answer an Auto-Latch call while you are on a handset call with
another caller:
Press the lit (solid)
and the (MUTE) key light turns off to indicate that the paging/intercom
party can hear you.
Begin speaking after the paging/intercom party addresses you.
Press (MUTE) to alternate between handset and handsfree
conversations. When you are speaking with the paging/intercom party, the
(MUTE) key light is off.
(MUTE) key light turns on solid to notify
(MUTE) key light turns off.
(MUTE) key. The handsfree microphone turns on
-42-