Call Forward - I'm Here - Mitel 5212 User Manual

To turn Call Forward on and off (once it has been programmed):
1. Press (SUPERKEY).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey.
4. Press # or the No softkey or the Next softkey until the desired call
forwarding option appears.
5. Do one of the following:
On a 5212 IP Phone, press *.
On a 5224 IP Phone, press the Change softkey, and then the
TurnOff or TurnOn softkey. To turn off call forwarding and delete
the destination number, press the Del softkey.
6. Press (SUPERKEY) to exit.

Call Forward - I'm Here

To forward calls from a remote station to your current location:
1. Press (SUPERKEY).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the No/Next softkey until "I'm Here?" appears.
5. Press * or the Yes softkey .
6. Dial the extension number of the remote station.
If you make an error while dialing, press # or the No softkey or the <—
softkey.
7. Press or the Save softkey.
To cancel Call Forward - I'm Here from the station that set it:
1. Lift the handset.
2. Dial *07.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward - I'm Here from the phone that was forwarded:
1. Press (SUPERKEY).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. When "Always?"* appears, press * or the Change softkey, then press #
or the Del softkey .
-21-