Headset Operation - Mitel 5212 User Manual

Headset Operation

To use a headset with your phone, ensure that the headset is connected to
the dedicated jack on the back of the phone.
To enable Headset Operation on telephones that are not programmed
for full-time headset mode:
Press the Headset feature key.
To answer a call (when Auto-Answer is disabled):
Press the flashing line key.
To switch between headset and handset operation while in a call (see
Note 2):
Press (MUTE). (You can talk using the headset when the MUTE key
IS lit and with the handset when the MUTE key is NOT lit.
To hang up:
Press (CANCEL).
Notes:
1. Lifting the handset on some 5224 IP phones while it is in headset mode
also answers the call.
2. This feature is available on some versions of the 5224 IP phone only.
3. Disconnecting the headset while in a call puts your phone in speaker-
phone, mute mode. You can hear the other party but they cannot hear
you. To talk to the other party, press
(SPEAKER).
(MUTE). To hang up, press
-36-