Specifications - A&D HW-G Series Instruction Manual

It is necessary to set the parameter of the "Print mode ( f9 )" in the function table in
advance.
It is necessary to set the parameter of the "Date ( f16 )" on the function table in advance.
Caution The date Parameter is not updated automatically.
Specification
Kind 5x7 dot matrix impact type
Characters
Width of roll paper 44.5mm
Accessories
Consumables
Special roll paper
Ink ribbon
Operation and Print Samples
Pressing the F switch while pressing and holding the PRINT switch, paper feed is
performed.
Print sample of selecting print mode f9 1
~ f9 4
Print sample of selecting print mode f9 5
Print sample of displayed accumulation data
HW-G OZIM v1a
16 characters per line
a special roll paper, an ink ribbon
AX-PP156-S
AX-ERC-05-S (Including 5 pieces in a set)
HW-G Instruction Manual Page 62
(Including 8 rolls in a set)
99/12/31
001
002
99/12/31
N
Total
2.345 kg
2345pc
76.98%
1.345 kg
1.325 kg
1.330 kg
3
7.810 kg