Misfeed In The Transport Area, Fusing Area, And Exit Area - Sharp AR-350 Operation Manual

MISFEED REMOVAL

Misfeed in the transport area, fusing area, and exit area

CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch the metal portion.)
1
Pull out the duplex module.
2
Remove the misfed paper.
If paper is misfed in the transport area:
Roller rotating knob A
If paper is misfed in the fusing area:
Roller rotating
knob B
CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch the metal portion.)
Fusing unit open tab
4-6
Hold the knob and gently
open the module.
If the machine is not
equipped with the duplex
module, open the side
cover similarly.
Turn roller rotating knob A
in the direction of the
arrow to remove the
misfed paper.
Turn roller rotating knob B
in the direction of the
arrow to remove the
misfed paper.
If the misfed paper is
inside the fusing area,
turn down the fusing unit
open tab to your side to
open the fusing unit and
remove the misfed paper.
If paper is misfed in the exit area:
3
Gently close the duplex module.
Remove the misfed paper
taking care not to tear the
paper.
If the duplex module is
equipped with an exit tray
and paper is misfed in the
exit area, remove the
misfed paper as shown in
the illustration.
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.