Overview Operating Menu - Siemens Synova FC330A Operating Manual

Overview operating menu

SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
ENABLE: 1. Detector/ConTrol ZONES
(1) 2. horn/RT/alarm contacts
3. printer
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
DISabling: 1. detector/ConTrol ZONES
(2) 2. horn/RT/alarm contacts
3. printer
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
INFO: 1. system status
(3) 2. event memory/alarm counter
3. configuration/user text
4. configuration zone/line/LON
6
Fire & Security Products
Siemens Building Technologies Group
After getting operating access, the start menu appears. From the main menu, all menus can be
selected (+ page 9, fundamental operation).
With access level 2 all menu points exept other functions − configuration can be
selected.
The passwort for access level 2 is:
ENabling:
(1.1)
ENabling:
(1.2)
ENable printout messages:
(old: #)
DISabling:
(2.1)
DISabling:
(2.2)
ENable printout messages:
(old: #)
STATUS: 1. fault
(3.1)
MEMORY: 1. event memory
(3.2)
INFO:
(3.3)
INFO:
(3.4)
1. detector 'zone'
2. detector 'element'
3. ConTrol 'zone'
4. All Fire Ctrl 'zones'
1. horn
2. alarm contacts
3. RT−alarm
4. RT−fault
1. log ALL
2. only ALARMS 3. log NONE
1. detector 'zone'
2. detector 'element'
3. ConTrol 'zone'
4. All Fire Ctrl 'zones'
1. horn
2. alarm contacts
3. RT−alarm
4. RT−fault
1. log ALL
2. only ALARMS 3. log NONE
2. isolation
3. pre−alarm
4. techn.alarm /element status
2. alarm counter
1. configuration system
2. configuration coll line
3. user text detector zn/elem
4. user text ConTrol zone
1. configuration det. zones
2. configuration addr. lines
3. configuration LON devices
Enable detector zones 1...256
Enable detector elements within zone
Enable control zones 1...64
Enable all control zones
Enable control lines 1...4 for alarm horns
Enable alarm contacts 1...4
Enable remote transmission ALARM
Enable remote transmission FAULT
Enable only event logging or all messages
Enable only alarms or none
Disable detector zones 1...256
disabling permanent or for a set time 1...98h
Disable detector ELEMENTS within zone
disabling permanent or for a set time 1...98h
Disable conTrol zones 1....64
Disable all control zones
Disable control line 1..4 for alarm horns
Disable alarm contacts 1...4
Disable remote transmission ALARM
Disable remote transmission FAULT
Disable only event logging or all messages
Disable only alarms or none
View fault messages
View turned off system components
View pre-alarm messages
View ELEMENT states
View reviewing event list
View number of alarms and remote alarms
View general parameter settings
View parameter settings coll. lines
View user texts detector zones/elements
View user texts control zones
View parameter settings detector zones
View parameter settings addr. lines
View parameter settings LON-bus
e1973c-2
02.2004