Normal Operation - Siemens Synova FC330A Operating Manual

Normal operation

What is "normal operation"?
Mains interruption
The delay is min
Standard default: 10 min
10
Fire & Security Products
Siemens Building Technologies Group
The system is ready to receive danger messages (alarm) from the detectors.
n
No fault messages are pending.
n
The green LED in the display field System on
n
The illumination of the text display
n
pressed or an alarm, fault or status is issued.
Display shows
Ü
In case of a mains interruption the fire detection system is powered by an internal battery. No
fault message is issued in the text display and the normal operation will continue , until a preset
default time is expired
When the system is powered by the internal battery the green LED in the display field System on
Ê is blinking.
ALARM
NORMAL OPERATION
WED 21.7.99
1
Remote alarm
System on
fault / off
Alarm horn
Fault
fault / off
Isolation System fault
Detector
test mode
FC330A
Ê is on.
Ë
may be turned off, but turns on as soon as any key is
NORMAL OPERATION
*
WED 21.7.99
2
15:00
Remote alarm
Alarm delay
off active
Premises
manned
15:00
Acknowledge
Silence/resound horn
Reset
Start/
7 8 9 F1
Stop
F2
4 5 6
ok
1 2 3
del 0
hm
e1973c-2
02.2004