Siemens Synova FC330A Operating Manual page 12

SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
FUNCTIONS: 1. function
(4) 2. system TEST
3. printout
4. configuration
only for service
engineer
8
Fire & Security Products
Siemens Building Technologies Group
CONFIGURATION: 1. user functions
(4.4) 2. user text
3. service functions
4. erase functions
Level SERVICE FUNCTIONS
> enter password?
hm: back to menu Stop: end operating
SERVICE 1. addr. line −> CONNECT
level : 2. addr. line −> DISCON.
(4.4.3) 3. test AI−LED's ON/OFF
4. reconfigure addr. lines
5. horn/ctrl/RT −> OFF
6. TEST−alarm −> HORN
7. Visualizer ON/OFF
8. re−parametrise LON
Level SERVICE FUNCTIONS
> enter password?
hm: back to menu Stop: end operating
ERASE data: 1. ERASE alarm counter
(4.4.4) 2. ERASE event memory
3. ERASE conf + sys data
4. ERASE element status
direct setting user parameters
direct definition user texts
connect addressable loop
disconnect addressable loop
for TEST LEDs
to reconfigure addr. lines
for COMMON disabling
to activate horn briefly with each det.
TEST alarm
enable / disable 'visualizer'
to start automatic configuration of LON-
Bus
(locked with switch 'S2')
(not locked)
only for specialized personell
to erase 'non−alarm' events
e1973c-2
02.2004