Siemens Synova FC330A Operating Manual page 28

Permanent disabling
Disabling for a few
hours
Viewing disabled zones
Zone reactivation procedure
24
Fire & Security Products
Siemens Building Technologies Group
Disable all zones
1. Enter 555 to disable all zones in the
building.
Display shows
Ü
2. Enter 99 for permanent disabling.
Display shows
Ü
or
Enter the desired disabling time in full
"
hours (e. g. 2).
Display shows
Ü
3. Press to finish the zone disabling
St
procedure.
Display shows
Ü
The yellow LED isolation is on.
Ü
Several zones disabled
Display shows
Ü
1. Press key to open list.
F1
Display shows
Ü
2. Press key to view details.
Display shows
Ü
After last zone has been displayed, sy-
Ü
stem turns back to overview.
Display shows
Ü
1. Press .
St
Display shows
Ü
2. Select option 1. ä 1. ä 1.
Display shows
Ü
The yellow LED isolation is off.
Ü
zone ### − ### SELECTED
> hours DISABLED?
*
hm: back to menu
zone ### permanent DISABLED
*
(hm = end) new zone no.?
hm: back to menu
zone ### DISABLED for ## hours
(hm = end) new zone no.?
*
hm: back to menu
parts of system DISABLED
*
WED 21.7.00 15:00
parts of system DISABLED
*
WED 21.7.00 15:00
display ISOLATIONS:
*
(key: = forward /
F1: next section hm/Stop: end operating
display ISOLATIONS:
*
zone ### − ### permanent DISABLED
: forward F2:ext info
parts of system DISABLED
*
WED 21.7.00 15:00
SELECT: 1. ENabling
(main menu) 2. DISabling
*
3. INFO polling
4. other functions
ENable zone: (range ### to ###)
*
> zone no.? (555 = all)
hm: back to menu
(99=permanent)
Stop: end operating
Stop: end operating
Stop: end operating
total:###
total:###
total:###
= backward)
total:###
: backwards
total:###
Stop: end operating
e1973c-4
02.2004