Table of Contents
Advertisement
46-11
Purpose
Adjustment
Function
Used to adjust individually the copy exposure level.
(Purpose)
(Photo)
Item
Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen)
(Input screen)
Sim46-11 PHOTO
1:
1.0(SHIFT)
50
2:
1.0(GAMMA) 50
3:
2.0(SHIFT) 50
1/4
50
Display items
Content
Photo level 1.0 (shift q'ty)
1:1.0(SHIFT)
Photo level 1.0 (slant)
2:1.0(GAMMA)
Photo level 2.0 (shift q'ty)
3:2.0(SHIFT)
Photo level 2.0 (slant)
4:2.0(GAMMA)
Photo level 3.0 (shift q'ty)
5:3.0(SHIFT)
Photo level 3.0 (slant)
6:3.0(GAMMA)
Photo level 4.0 (shift q'ty)
7:4.0(SHIFT)
Photo level 4.0 (slant)
8:4.0(GAMMA)
Photo level 5.0 (shift q'ty)
9:5.0(SHIFT)
10:5.0(GAMMA) Photo level 5.0 (slant)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
46-12
Purpose
Adjustment
Function
FAX exposure level adjustment (batch)
(Purpose)
Operation/procedure
Shading is performed to turn on the copy LED.
The current exposure value of "Normal character, Auto exposure"
mode is displayed.
Enter an adjustment value of 2 digits with the 10-key and press the
START key, and the entered value will be set to all the modes and the
self print will be made in the normal size.
Exposure adjustment value table
Mode
AE
STD
Auto
(Standard
Manual
character)
Auto
Manual
Fine
Auto
(Small
Manual
character)
Auto
Manual
S-fine
Auto
(Fine)
Manual
Auto
Manual
U-fine
Auto
(Super fine)
Manual
Auto
Manual
When initializing each data: 50
Note: Executable only when the FAX is installed.
Density
(Executing screen)
Setting
Default
range
1-99
32
50
41
50
50
50
56
61
62
66
Photo
Exposure adjustment
ON
–
OFF
ON
OFF
Individual adjustment
ON
enable
(46-13 to 16)
OFF
ON
OFF
AR-5127 SIMULATION 8 - 28
46-13 to 16
Purpose
Adjustment
Function
FAX exposure level adjustment (individual)
(Purpose)
Operation/procedure
The FAX exposure level can be adjusted separately for each mode by
specifying a sub code. Since selection of Auto/Manual and Photo ON/
OFF is allowed separately for each mode, adjustments of 14 patterns
in total can be made.
(Refer to 46-12, "Exposure adjustment table".)
Sub code
Mode
13
STD (normal character)
14
Fine (small character)
15
S-fine (super fine)
16
U-fine (super fine)
Shading is performed to turn on the copy LED.
The current exposure value of the selected mode is displayed.
Enter the 2-digit adjustment value with the 10-key pad and push
START key. The entered value is set for the specified mode, and the
self print is made with the same magnification ratio for the mode.
Note: Executable only when the FAX is installed.
46-18
Purpose
Adjustment
Function
Used to adjust the copy contrast. (Inclination)
(Purpose)
Item
Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen)
(Input screen)
Sim46-18 GAMMA SET.
1:AE
50
2:TEXT
50
3:TEXT/PHOTO
50
1/3
50
(Auto adjustment)
Display items
AE
1:AE
Character
2:TEXT
Character/Photo
3:TEXT/PHOTO
Photo
4:PHOTO
Super photo
5:SUPER PHOTO *
AE(TS)
6:AE(TS)
Character (TS)
7:TEXT(TS)
Character/Photo (TS) Level 3.0
8:TEXT/PHOTO(TS)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
* SUPER PHOTO (5:) cannot be executed.
When [OK] or [START] key is pressed, a caution buzzer sounds.
(Only the adjustment value can be entered.)
(Executing screen)
Setting
Content
Default
range
1-99
50
Level 3.0
Level 3.0
Level 3.0
Disabled
Level 3.0
50
Level 3.0
Hide quick links:
Advertisement
Table of Contents
