Table of Contents
Advertisement
26-38
Purpose
Setting
Function
Used to set whether to stop when the drum life is
(Purpose)
reached.
Item
Operation
Operation/procedure
Input the set value with the 10-key and press the [OK] key.
Sim26-38 DRUM STOP
DRUM LIFE OVER
0
(0:STOP
1:NON STOP)
[ 0- 1]
0
Display items
Content
Stop
0:STOP
Non stop
1:NON STOP
Note: Executable only with CRU (DM models).
26-41
Purpose
Setting
Function
Used to set whether the automatic magnification ratio
(Purpose)
select (AMS) is always ON or not when setting the
pamphlet (center binding) function.
Item
Operation
Operation/procedure
AMS mode is set when setting the pamphlet (center binding) function.
Sim26-41 PAMPHLET
AMS MODE SET
0
(0:OFF 1:ON)
[ 0- 1]
0
Display items
Content
AMS is not set
0:OFF
automatically.
AMS is set automatically.
1:ON
26-46
Purpose
Setting
Function
Used to set whether to meet with the output direction of
(Purpose)
images regardless of the mode when installing the
finisher.
Item
Operation
Operation/procedure
Input the set value with the 10-key and press the [OK] key.
Sim26-46 OUT DIR
OUT DIRECTION
0
(0:OFF 1:ON)
[ 0- 1]
0
Display items
Content
Setting No
0:OFF
Setting Yes
1:ON
Note: Executable only when the finisher is installed.
26-50
Purpose
Setting
Function
Used to set whether to use the black/white reverse
(Purpose)
function.
Item
Operation
Setting range
Default
0-1
0
Setting range
Default
0-1
Setting range
Default
0-1
0
AR-5127 SIMULATION 8 - 22
Operation/procedure
Input the set value with the 10-key and press the [OK] key.
Sim26-50 B/W REV.
B/W REVERSE
(0:ON 1:OFF)
[ 0- 1]
26-54
Purpose
Setting
Function
Used to set the PWM duty (brightness) at the center
(Purpose)
value of the LCD contrast.
Item
Operation
Operation/procedure
Input the set value with the 10-key and press the [OK] key, and the
LCD contrast will be immediately changed and displayed.
Sim26-54 LCD DUTY
LCD PWM DUTY
[ 30- 70]
Setting range
30-70
Default
50
26-57
Purpose
Setting
Function
Used to set the model code.
(Purpose)
Item
Operation
Operation/procedure
Input the set value with the 10-key and press the [OK] key.
0
Sim26-57 MACHINE
MACHINE CODE
(1:AR-265G
2:AR-265FG
1/2 [
1- 3]
Display items
1:AR-265G
2:AR-265FG
3:AR-5127
If a model different from CPM setup (22cpm or 27cpm) of BOOT is set,
a system error will occur after canceling the simulation.
26-60
Purpose
Setting
Function
Used to set enable/disable of the FAX mode key when
(Purpose)
FAX is not installed. (When FAX is installed, the FAX
mode is enabled regardless of this setup.)
Item
Operation
Operation/procedure
Input the set value with the 10-key and press the [OK] key.
This setup varies in connection with SIM 26-6 (Destination setup).
Sim26-60 FAX KEY
FAX KEY SETTING
(0:ON 1:OFF)
[ 0- 1]
Display
Content
items
0
Enable
0:ON
Disable
1:OFF
0
0
0
1
1
Setting range
Default
1-3
1
0
0
Setting
Default
range
0-1
0
Hide quick links:
Advertisement
Table of Contents
