Sharp AR-5127 Service Manual page 59

50
50-1
Purpose Adjustment
Function Used to adjust the copy lead edge position.
(Purpose)
Item Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
Display items
Original scan start position adjustment
1:RRC-A
Lead edge cancel adjustment (Main cassette)
2:RRC-B
Lead edge cancel adjustment (Manual feed cassette)
3:RRC-MANUAL
Lead edge cancel adjustment (Option cassette)
4:RRC-OPTION
Lead edge cancel adjustment (back of the machine)
5:RRC-DUPLEX
Rear edge void adjustment
6:DEN-B
Rear edge void adjustment (Duplex)
7:DEN-B-DUP
Left edge void adjustment (First print surface)
8:SIDE VOID
Left edge void adjustment (Duplex)
9:SIDE VOID-DUP
Image loss quantity adjustment
10:LOSS(OC)
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTERRUPT] key is inhibited.
50-5
Purpose Adjustment
Function Used to adjust the print image position (top margin) on
(Purpose) the print paper in the print mode.
Item Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen) (Input screen)
Sim50-5 PRINT EDGE
1:TRAY1 50
2:OPTION 50
3:MANUAL 50
1/2 50
Display
Content
items
1st cassette
1:TRAY1
Option cassette
2:OPTION
Manual feed
3:MANUAL
Back print
4:DUPLEX
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Image position
Content
Print area
(Executing screen)
Setting
Default Remark
range
0-99 53 Tray selection:
1st cassette is
specified.
1-99 Tray selection:
2nd cassette is
specified.
Tray selection:
Manual feed
cassette is
specified.
Tray selection:
Made by user.
AR-5127 SIMULATION 8 - 31
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen) (Input screen)
Sim50-1 LEAD EDGE
1:RRC-A 43
2:RRC-B 18
3:RRC-MANUAL 18
1/4 [ 1- 99] 43
Setting
Default
range
1-99 43 Tray selection: Made by user.
1-99 18 Tray selection: Main cassette is specified.
1-99 18 Tray selection: Manual feed cassette is
specified.
1-99 18 Tray selection: 2nd cassette is specified.
1-99 18 Tray selection: Made by user.
1-99 30 Tray selection: Made by user.
1-99 50 Tray selection: Made by user.
1-99 18 Tray selection: Made by user.
1-99 18 Tray selection: Made by user.
1-5 3 Tray selection: Made by user.
50-6
Purpose Adjustment
Function Used to adjust the print image position (top margin) on
(Purpose) print paper in the copy mode. (SPF/RSPF)
Item Picture quality
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen) (Input screen)
Sim50-6 SPF EDGE
1:SIDE1 50
2:SIDE2 50
3:DEN-B 50
1/4 50
Display items
Surface original scan start
1:SIDE1
position adjustment value
Back original scan start
2:SIDE2
position set value
Rear edge void
3:END EDGE
adjustment value (SPF)
Surface image loss
4:LOSS(SIDE1)
quantity set value
Back image loss quantity
5:LOSS(SIDE2)
set value
6:REARLOS(SIDE1) Surface rear edge image
loss quantity set value
7:REARLOS(SIDE2) Back rear edge image
loss quantity set value
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
(Executing screen)
Remark
Image position
(Executing screen)
Setting
Content Default
range
1-99
1-99
1-99
1-5
1-5
1-5
1-5
50
50
36
3
3
3
3