Table of Contents
Advertisement
Teaching switch
Information switch
Material edge sensor switch
One-shot stitching switch
With/without automatic
thread trimmer switch
Thread trimming
prohibiting switch
Counter value setting
switch
Max. speed limitation variable
resistor
Power display lamp
Smart media cover
Smart media slot
(Smart media inserting opening)
This is the switch to set the setting of the number of stitches with
the value of number of stitches which has been actually sewn.
This is the switch to perform various function settings.
Rendered effective when the material edge sensor is installed on
the machine.
Used for selecting whether or not the material edge sensor is used
during sewing.
When this switch is set to effective at the time of program stitching,
the sewing machine automatically operates up to the specified
number of stitches.
When this switch is set to effective at the time of program stitching,
the sewing machine automatically performs thread trimming when
the specified number of stitches has been completed.
This switch prohibits all thread trimmings.
* This switch cannot be used with the sewing machine which is not
provided with the automatic thread trimming device.
This is the switch to set the value of bobbin thread counter or No. of
pcs. counter.
When moving the resistor in the left direction, max. speed is limited.
This lamp lights up when the power switch is turned ON.
This is the cover for smart media inserting opening.
To open the cover, place your finger on the notch located on the
side of the cover as shown in the figure and push the cover in the
direction of left slanting rear.
* There are some functions that are not able to be operated with
the cover opened.
Do not close the cover unless smart media is completely inserted.
To set smart media, insert smart media into smart media slot and
push it until it is almost hidden.
To remove smart media, push it further again and it protrudes to
the position where it can be held between your fingers. Now, draw
it out.
* Be very careful of the inserting direction of smart media.
– 4 –
Advertisement
Table of Contents
