External Interface; Error Display - JUKI IP-100 Instruction Manual

Sewing machine

Hide thumbs Also See for IP-100:

Table of Contents

6. EXTERNAL INTERFACE

External interface means the section to connect the operation panel and the system which is different from the

operation panel.

For the use and details, refer to the Engineer's Manual.

1) Smart media slot

Smart media slot is installed in the face cover located on the left side of operation panel.

2) RS-232C port

RS-232C connector is installed in the rubber cap located on the back side of operation panel.

3) General input port (Production control switch connecting connector)

General input connector, CN105 is installed in the cord outlet cover located on the back side of operation

panel.

Error is informed by means of the panel display and control box buzzer.

Reference

Three different kinds of screens of the panel display screen appear due to the difference of the procedures.

1) Error screen disappears when the operator

removes the cause.

2) Press the reset switch, and remove the

cause of error after erasing the error

screen.

3) Remove the cause of error after turning

OFF the power.

– 74 –

Table of Contents