Take-In Of The Data - JUKI AMB-289 Instruction Manual

(4) Take-in of the data

6
2
4
1) Display the communication screen.
When communication switch
switch seat section is pressed in the data
input screen, the communication screen is
displayed.
2) Select the communication procedure.
3
There are four communication procedures as
described below.
5
2 Writing data from media to panel
3 Writing data from personal computer
(server) to panel
4 Writing data from panel to media
1
5 Writing data from panel to personal
computer (server)
Select the button of communication procedure
you desire.
3) Select the data No.
When
selection screen is displayed.
Input the file No. of the data you desire to
write. For the file No., input the numerals of
the part of AMB 00 .EPD of the file
name.
Designation of the pattern No. of writing
destination can be performed in the same
way. When the writing destination is the panel,
pattern Nos. which have not been registered
7
are displayed.
4) Determine the data No.
When ENTER button
the data No. selection screen is closed and the
selection of the data No. has been completed.
@– 97
is pressed, the writing file
6
7
of
1
is pressed,