Performing Pattern No. Selection - JUKI AMB-289 Instruction Manual

4. PERFORMING PATTERN No. SELECTION

2
1
4
1) Display the data input screen.
Only in case of the data input screen (blue),
the contents of setting can be changed. In
case of the sewing screen (green), press
READY key
input screen.
2) Call the pattern No. selection screen.
Press PATTERN NO. SELECTION button
2 and the pattern No. selection screen
is displayed. Pattern No. which is selected
at present and the contents are displayed
in the upper part of the screen and the list
of the pattern No. buttons which have been
registered is displayed in the lower part.
3) Select the pattern No.
When UP or DOWN SCROLL button
3 is pressed, the pattern No. buttons
4 which have been registered are changed
5
over in order. The contents of the sewing data
inputted in the pattern No. are displayed in
the button. Here, press the pattern No. button
4 you desire to select.
3
4) Determine the pattern No.
6
P r e s s E N T E R b u t t o n
pattern No. selection screen is closed. Then
the selection has been finished.
* When you desire to delete the registered
pattern, press DELETE button
H o w e v e r, t h e p a t t e r n w h i c h h a s b e e n
registered to the cycle stitching cannot be
deleted.
@– 12
1 and display the data
5 , a n d t h e
6 .