Performing Cycle Stitching; Selection Of The Cycle Data - JUKI AMB-289 Instruction Manual

29. PERFORMING CYCLE STITCHING

First, change the sewing mode to the cycle stitching before performing setting.
"27. CHANGING SEWING
→ Refer to

(1) Selection of the cycle data

2
1
3
MODE".
1) Display the data input screen.
Only in case of the data input screen (pink),
it is possible to select the cycle data No. In
case of the sewing screen (green), press
READY key
input screen (pink).
2) Call the cycle data No. selection screen.
When cycle data No. button
pressed, the cycle data selection screen is
displayed. Cycle data No. which is selected at
present and the contents are displayed in the
upper part of the screen and other cycle data
No. buttons which have been registered are
displayed in the lower part of the screen.
3) Select the cycle data No.
When UP/DOWN button is pressed, the
registered cycle data No. selection buttons 3
are changed over in order. Contents of cycle
data are displayed in the buttons. Here, press
cycle data No. selection button 3 you desire
to select.
4
4) Determine the cycle data No.
When ENTER button
the cycle data No. selection screen is closed
and the selection has been completed.
@– 58
1 and display the data
2 is
4 is pressed,