Stitching Without The Crossover Thread; Operating Procedure Of The Operation Panel (Applied Volume) - JUKI MB-1800 series Instruction Manual

(7) Check the needle entry point.
Press set ready switch
is in the state of being lifted. At this time, insert the button.
Press button clamp lifting switch
switches 2 and the feed moves forward/backward. Then check the needle entry point.
Press /
At this time, "
When lowering needle, turn the hand pulley referring to P.15.
(8) Perform sewing.
When checking of the needle entry point is completed, press reset switch
The button clamp goes up in this state. It is in the sewing possible state.
Set a button and the cloth to the machine and depress the starting pedal.

4. Stitching without the crossover thread

When the optional without-crossover-thread device is installed, it is possible to perform stitching without
crossover thread in case of stitch shapes of
trimming is performed during sewing if a pattern No. without crossover thread is selected.
The selection LED corresponding to the stitch shape flashes on and off, and the stitch shape without crossover
thread can be discriminated.

5. Operating procedure of the operation panel (applied volume)

(1) Cycle stitching
The button can be sewn in the predetermined order with the max. 15 different kinds of sewing methods.
For example, the button can be repeatedly sewn in the order of
To call the cycle stitching can be performed by lighting up the LED of pattern No.
4 and pressing
switch
arranged the next pattern of No. 51 unless the external ROM is provided, and "
section A 3.
In this state, press set ready switch
Then sewing is performed in the order of the max. 15 kinds of sewing conditions (P1 to PF) that have been
programmed in advance.
5, the machine confirms the position of the origin and the button clamp
6 to lower the button clamp.
" is displayed at display section A 3.
6
1
2
4
7
switch 8. The cycle stitching is arranged at the last of pattern No., is
5, and "
, X and . Even when the device is not installed, thread
, X and Z.
" will be displayed at display section A 3.
OPERATION OF THE SEWING MACHINE
7.
5
8
3
with item selection
" is displayed at display