Operating Procedure Of The Operation Panel (Basic Volume) - JUKI MB-1800 series Instruction Manual

3. Operating procedure of the operation panel (basic volume)

6
1
2
4
7
(1) Turn ON the power switch.
(2) Select the stitch shape.
Press stitch shape selection switch
Stop the representative stitch shape at the position where the LED lights up, and place the other stitch
shapes at the position of
(3) Determine the pattern.
switches 2 at the position where the LED lights up, and the pattern No. will be displayed
Press /
at display section A 3.
For the pattern No. and the stitch shape, refer to the table on P.9.
(4) Select the number of stitches.
Press item selection switch
The number of stitches set in advance with the pattern No. will be displayed at display section A 3.
Here, press /
Number of stitches cannot select the combination other than that set in advance.
(5) Determine the sewing pitch.
Press item selection switch
The sewing pitch set in advance with the pattern No. will be displayed at display section A 3.
Here, press /
Sewing pitch can be changed 2 to 6.5 mm in increments of 0.2 mm.
(6) Determine the number of revolution
Press item selection switch
displayed at display section A 3. This means 18 x 100 = 1,800 sti/min. The digits less than 100 sti/min
are omitted and displayed in case of this machine.
Here, press /
OPERATION OF THE SEWING MACHINE
.
4 so that the LED comes to the position of
switches 2 to change the number of stitches.
4 so that the LED comes to the position of
switches 2 to change the the sewing pitch.
4 so that the LED comes to the position of
switches 2 to change the number of revolution.
1 and LED moves.
5
3
.
.
and " " will be