Preparation Of The Sewing Machine; Attaching The Needle; Threading The Machine - JUKI MB-1800 series Instruction Manual

$. PREPARATION OF THE SEWING MACHINE

1. Attaching the needle

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
2

2. Threading the machine

WARNING :
Turn OFF the power before starting the work so as to prevent accidente caused by adrupt start of the
sewing machine.
Thread the machine in the order as illustrated.
Finally, pass the thread through the needle eye by approximately 60 to 70 mm.
!1
!3
!2
!5
!6
1
9
8
!0
!4
The needle of TQx7 #16 is attached to the sewing
machine.
Loosen setscrew 1 and hold needle 2 with its
long groove facing to this side. Insert needle 2 up
into the needle hole in the needle bar until it comes
in contact with the deepest end of the needle hole
and tighten setscrew 1.
5
3
6
4
7
5
4
6
7
PREPARATION OF THE SEWING MACHINE
2
1
2
3
1