Installing The Belt Cover (For Lh-3528A, 3568A, 3578A And 3588A); Attaching The Needles - JUKI LH-3500A series Instruction Manual

4-8. Installing the belt cover (For LH-3528A, 3568A, 3578A and 3588A)

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
) �rll gude holes A and B of wood screws n the table.
2) Temporarily fix belt cover B 1 to the place of gude holes A and B .
3) Install belt cover A 2 to the arm nstallng secton.
4) Adjust the poston of belt cover B 1 and fix it with wood screw.

4-9. Attaching the needles

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
[LH-3568A, 3568A-7, 3588A and 3588A-7]
2
1
[LH-3528A(S type and G type), 3528A-7, 3578A and
3578A-7]
2
1
1
2
2
1
3
2
1
3
LH-3528A, 3568A
LH-3578A, 3588A
[LH-3528A(A type and F type)]
2
1
Swtch "off" the motor.
Use �Px5(34) needles.
) Turn the handwheel untl the needle bar has
come up to the hghest pont of ts stroke.
2) Loosen needle clamp screws 2 and pck up two
needles 1 n the way that ther grooves 3 are
facng outwards.
3) Insert the needles nto the needle clamp as far
as they wll go.
4) Tghten needle clamp screws 2 firmly.
– 8 –
47
A
B
(mm)
2
1
3